Major Driveway (replacement of elevated drive way) demolish exist drive way to scratch clean up and haul away the debris . prepare surface and creat new footings following approved engineer plans(plans) provided by customers build new driveway frames following the plans complete brand new drive way and pass all city inspections clean up and haul away the debris.
Fence : 1.Demolition of the existing wooden fence. Install 100 leaner 8’ tall block wall. 3.Fence to connect to neighbors chimney. See google map picture attached. Cement work: 1.Demolition of 39’ feet driveway and install new ones. (Picture attached) 2.Replace walkway to the house (Picture attached) 3.Add 2 stairs in house entrance (Picture attached) 4.Add cement next to the house 1’ feet next to house entrance (Picture attached) 5.Add cement next to the house 1’ feet in house front with lights installed inside cement. (Picture attached) client have the fixtures ready (Picture attached) 6.Add cement next to the house 1’ feet 38 long to prevent water going to the the foundation. 7.Add dement next to block wall (33’+20’) lights to be installed into cement.
FOUNDATION REPAIR REQUIREMENTS: (need confirmation before proceeding) Shore up structure in work areas Raise the structure 1/4” with hydraulic jacks to relieve pressure Install wood shims on existing concrete piers blocks that have lost contact with girder beam Sister/Install (approx. 10) 4x4 pier and posts on existing girder beams Install wood shims on stem wall that has lost contact with floor joists Install (approx. 10' LF) 4x6 pressure treated girder beams below hallway/bedroom for additional support Install (3) 4x4 pressure treated pier and post support on new girder beam Inject epoxy and heavy duty Simpson Straps on open cracks on the foundation footing Clean up and haul construction debris